| Last Modified: 11-29-2007 | 1.6 M | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000PDT03TX |
| Title: 2UZ-FE ENGINE CONTROL: SFI SYSTEM: REGISTRATION (2008 Sequoia) | ||
REGISTRATION
1. DESCRIPTION (Using Techstream)
HINT:
This registration section consists of two parts, Read VIN and Write VIN.
(a) Read VIN: This process allows the VIN stored in the ECM to be read in order to confirm that the two VINs, provided with the vehicle and stored in the vehicle's ECM, are the same.
(b) Write VIN: This process allows the VIN to be input into the ECM. If the ECM is changed, or the ECM VIN and vehicle VIN do not match, the VIN can be registered, or overwritten in the ECM by following this procedure.
2. READ VIN
(a) Confirm the vehicle VIN.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream ON.
(e) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.
3. WRITE VIN
(a) Confirm the vehicle VIN.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream ON.
(e) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.
|
|